Home01 About02 Services03 Portfolio04 Blog05 Contact06
Get a Free Quote
ServiceEst. 1984 · FujairahAll 7 emirates · Quote in 24h

Aluminium Windows & Doors
Systems, Glazing & Coastal Specification

Sliding, casement, tilt-and-turn, bifold and pivot systems with thermal break profiles and Low-E glazing — measured, fabricated, coated and installed by one team.

HomeServices › Aluminium Windows and Doors

Al Taher Group fabricates and installs aluminium windows and doors across all seven emirates — Fujairah, Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah and Umm Al Quwain — from our Fujairah workshop, with thermal break profiles, Low-E glazing and powder coating on our own line. Al Taher fabricates and installs aluminium windows and doors across all seven emirates from our Fujairah workshop, with thermal break profiles, double and Low-E glazing, and powder coating applied on our own line.

How we work

  1. Free site visit within 48 hours — we measure the actual structure, not a drawing.
  2. Itemised quotation within 24 hours of the visit — priced line by line.
  3. Fabrication in our own Fujairah workshop — no subcontracting.
  4. Installation by our own team, with committed dates in the quotation.

Which system suits which opening?

SystemBest forWhy
SlidingLiving rooms, balconies, viewsWide spans, no swing space needed
CasementBedrooms, dusty or noisy elevationsCompression seal — tightest against dust and sound
Tilt-and-turnUpper floorsSecure ventilation plus full opening for cleaning
BifoldGarden and terrace openingsFolds fully clear to open a whole wall
Pivot / lift-and-slideFeature entrances, very large panelsHandles weight that hinges cannot
FixedFeature glazing, stairwellsMaximum glass, best seal, lowest cost per m²
Aluminium windows fabricated and installed by Al Taher Group

Why does a thermal break matter in the UAE?

Bare aluminium conducts heat extremely well — the opposite of what you want between a 45°C afternoon and your air conditioning. A thermally broken profile inserts a continuous polyamide insulating bar inside the frame, separating the hot outer face from the cool inner face. The result is less heat entering the room, lower AC load and reduced condensation risk. For any air-conditioned villa we recommend thermally broken systems as standard.

Why does the glazing do most of the work?

The glass is most of the window's area. A double-glazed unit traps an insulating cavity; a Low-E coating reflects infrared heat while letting daylight through. For roadside bedrooms, acoustic laminated glass cuts noise substantially. Double glazing explained → · Full villa window spec guide →

Aluminium or uPVC — or both?

These are complementary systems. Aluminium spans wide openings with slim sightlines; uPVC insulates well on smaller openings and never corrodes. Most villas end up with both, specified opening by opening. uPVC & WPC doors → · Compared in detail →

What hardware and finish should you specify?

Multi-point locking, quality rollers and corrosion-resistant hinges are what determine whether a large sliding panel still runs smoothly in five years — hardware is where cheap window packages reveal themselves. Frames are powder-coated on our own line in any RAL colour. Hardware guide →

In Fujairah? See our aluminium and glass service in Fujairah.

What does replacement in an occupied villa involve?

Most of our window work is replacement, not new build — and living in the house during it is normal. The survey records each opening's real dimensions and condition, and flags anything the frames are hiding, like failed sealant or damaged reveals. Fabrication happens entirely off-site, so the disruptive phase is only the swap itself: old frame out, opening prepared, new frame in, sealed and glazed — typically room by room, with each opening closed and weather-tight the same day it is opened. We sequence bedrooms first or last around your routine, protect floors and furniture, and remove old frames and debris as we go. The practical gain arrives immediately: rooms hold their temperature, road noise drops, and the AC stops fighting a leaking frame. For phased budgets we also split schedules — sun-facing elevations first, where thermal-break frames and Low-E glazing pay back fastest, with the sheltered elevations following later under the same colour batch so nothing mismatches.

Free site visit within 48 hours.

Itemised quotation within 24 hours of the visit — no charge, no obligation.

Get a Quote

Frequently Asked Questions

Are thermal break aluminium windows worth it in the UAE?

For any air-conditioned room, yes. The insulating polyamide barrier stops the frame conducting outdoor heat inside, and combined with double glazing it measurably reduces cooling load — which is where most UAE electricity goes.

Sliding or casement windows for a villa?

Both, in different rooms. Sliding suits wide openings, balconies and views because it needs no swing space. Casement seals tighter against dust and noise, which makes it better for bedrooms and exposed elevations.

What does Low-E double glazing do?

Low-E glass carries a microscopic coating that reflects infrared heat while letting visible daylight through. In a double-glazed unit it is the single most effective glass upgrade for the UAE climate.

How do aluminium windows hold up in coastal areas?

It comes down to the finish. Properly prepared and powder-coated frames last for decades near the sea; thin or poorly prepared coatings blister within a couple of seasons. We coat on our own line for exactly that reason.

Do you supply and install, or supply only?

Almost all our work is supply and install. We measure the actual openings, fabricate to those dimensions and fit with our own team — which is where most window problems are avoided.

← All services · Our work in Fujairah